04
май
Menu
The Chevrolet Impala has been manufactured throughout the 1990s and 2000s, and today offers drivers the keyless entry remote system. Whether the system was installed with the car or purchased as an aftermarket option, you can program or reprogram your remote in just minutes from the car. Reprogramming requires only your ignition key and your.
- Home
- About
- Find Parts
- Engines & Transmissions
- GM Performance
A keyless entry remotes makes our lives easier by locking and unlocking the Silverado from up to 40 feet away. If you've purchased an additional remote, also known as a fob, you'll need to program it to sync with your truck.
Whether you own a 2001 or a 2010, follow these 7 easy steps and you'll have your Silverado remote programmed in five minutes. Battlefield 2 download iso download.
If Your Silverado Doesn't Have a Vehicle Information Center (pre-2007)
Step 1: Sit in the vehicle with all the doors closed and unlocked. Insert the key into the ignition. Do not turn the key until directed.
Step 2: Press and hold the Unlock button on the driver's side door. You will hear the locks make two clunking noises, indicating they have completed an unlock/lock cycle. Continue to hold down the Unlock button.
Step 3: While holding down the Unlock button, turn the key to the accessory power position then back to the off position. Repeat turning the key from the accessory power position to the off position for a total of two cycles.
Step 4: Release the Unlock button. Your Silverado will automatically cycle the locks as it did in Step 2.
Step 5: Simultaneously hold down the Lock and Unlock buttons on your fob for 15 seconds.
Step 6: Program any additional remotes for repeating Step 6 for each remote. Up to four remotes can be programmed.
Step 7: Exit programming mode by starting your Silverado. Turn off the vehicle and test your remotes.
If Your 2007-2010 Silverado Has a VIC - Vehicle Information Center
Step 1: Sit in the vehicle with all the doors closed and unlocked. Start your Silverado and leave it in Park.
Step 2: Press and hold the Vehicle Information button, marked by an image of a car and the letter 'i', until the display reads 'Press V to Relearn Remote Key'.
Step 3: Press the Set/Reset button until 'Remote Key Learning Active' appears.
Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed.
Step 5: Program additional remotes by repeating Step 4 for each fob.
Step 6: Exit programming mode by turning off the vehicle and removing the key.
Step 7: Test your remote(s).
If Your 2007-2010 Silverado Doesn't Have a VIC - Vehicle Information System
Step 1: Sit in the vehicle with all the doors closed and unlocked. Turn the key to Accessory Power position.
Step 2: Press the trip odometer meter reset stem repeatedly until you see 'Relearn Remote Key'.
Step 3: Press and hold the trip odometer meter stem for three seconds. The display will read 'Key Learning Active'.
Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed.
Step 5: Program additional remotes by repeating Step 4 for each fob.
Step 6: Exit programming mode by turning off the vehicle and removing the key.
Step 7: Test your remote(s).
If You Have a 2011-2014 Silverado
Bring your vehicle into your local dealership to have your remote(s) programmed.
When in doubt, check your owner's manual. Information on how to program your remote is located in the Driver's Information Center section.
Popular Posts
- Menu
The Chevrolet Impala has been manufactured throughout the 1990s and 2000s, and today offers drivers the keyless entry remote system. Whether the system was installed with the car or purchased as an aftermarket option, you can program or reprogram your remote in just minutes from the car. Reprogramming requires only your ignition key and your.
- Home
- About
- Find Parts
- Engines & Transmissions
- GM Performance
A keyless entry remotes makes our lives easier by locking and unlocking the Silverado from up to 40 feet away. If you\'ve purchased an additional remote, also known as a fob, you\'ll need to program it to sync with your truck.
Whether you own a 2001 or a 2010, follow these 7 easy steps and you\'ll have your Silverado remote programmed in five minutes. Battlefield 2 download iso download.
If Your Silverado Doesn\'t Have a Vehicle Information Center (pre-2007)
Step 1: Sit in the vehicle with all the doors closed and unlocked. Insert the key into the ignition. Do not turn the key until directed.
Step 2: Press and hold the Unlock button on the driver\'s side door. You will hear the locks make two clunking noises, indicating they have completed an unlock/lock cycle. Continue to hold down the Unlock button.
Step 3: While holding down the Unlock button, turn the key to the accessory power position then back to the off position. Repeat turning the key from the accessory power position to the off position for a total of two cycles.
Step 4: Release the Unlock button. Your Silverado will automatically cycle the locks as it did in Step 2.
Step 5: Simultaneously hold down the Lock and Unlock buttons on your fob for 15 seconds.
Step 6: Program any additional remotes for repeating Step 6 for each remote. Up to four remotes can be programmed.
Step 7: Exit programming mode by starting your Silverado. Turn off the vehicle and test your remotes.
If Your 2007-2010 Silverado Has a VIC - Vehicle Information Center
Step 1: Sit in the vehicle with all the doors closed and unlocked. Start your Silverado and leave it in Park.
Step 2: Press and hold the Vehicle Information button, marked by an image of a car and the letter \'i', until the display reads \'Press V to Relearn Remote Key\'.
Step 3: Press the Set/Reset button until \'Remote Key Learning Active\' appears.
Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed.
Step 5: Program additional remotes by repeating Step 4 for each fob.
Step 6: Exit programming mode by turning off the vehicle and removing the key.
Step 7: Test your remote(s).
If Your 2007-2010 Silverado Doesn\'t Have a VIC - Vehicle Information System
Step 1: Sit in the vehicle with all the doors closed and unlocked. Turn the key to Accessory Power position.
Step 2: Press the trip odometer meter reset stem repeatedly until you see \'Relearn Remote Key\'.
Step 3: Press and hold the trip odometer meter stem for three seconds. The display will read \'Key Learning Active\'.
Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed.
Step 5: Program additional remotes by repeating Step 4 for each fob.
Step 6: Exit programming mode by turning off the vehicle and removing the key.
Step 7: Test your remote(s).
If You Have a 2011-2014 Silverado
Bring your vehicle into your local dealership to have your remote(s) programmed.
When in doubt, check your owner\'s manual. Information on how to program your remote is located in the Driver\'s Information Center section.
...'>Program Key Fob 2004 Chevy Impala(04.05.2020) - Menu
The Chevrolet Impala has been manufactured throughout the 1990s and 2000s, and today offers drivers the keyless entry remote system. Whether the system was installed with the car or purchased as an aftermarket option, you can program or reprogram your remote in just minutes from the car. Reprogramming requires only your ignition key and your.
- Home
- About
- Find Parts
- Engines & Transmissions
- GM Performance
A keyless entry remotes makes our lives easier by locking and unlocking the Silverado from up to 40 feet away. If you\'ve purchased an additional remote, also known as a fob, you\'ll need to program it to sync with your truck.
Whether you own a 2001 or a 2010, follow these 7 easy steps and you\'ll have your Silverado remote programmed in five minutes. Battlefield 2 download iso download.
If Your Silverado Doesn\'t Have a Vehicle Information Center (pre-2007)
Step 1: Sit in the vehicle with all the doors closed and unlocked. Insert the key into the ignition. Do not turn the key until directed.
Step 2: Press and hold the Unlock button on the driver\'s side door. You will hear the locks make two clunking noises, indicating they have completed an unlock/lock cycle. Continue to hold down the Unlock button.
Step 3: While holding down the Unlock button, turn the key to the accessory power position then back to the off position. Repeat turning the key from the accessory power position to the off position for a total of two cycles.
Step 4: Release the Unlock button. Your Silverado will automatically cycle the locks as it did in Step 2.
Step 5: Simultaneously hold down the Lock and Unlock buttons on your fob for 15 seconds.
Step 6: Program any additional remotes for repeating Step 6 for each remote. Up to four remotes can be programmed.
Step 7: Exit programming mode by starting your Silverado. Turn off the vehicle and test your remotes.
If Your 2007-2010 Silverado Has a VIC - Vehicle Information Center
Step 1: Sit in the vehicle with all the doors closed and unlocked. Start your Silverado and leave it in Park.
Step 2: Press and hold the Vehicle Information button, marked by an image of a car and the letter \'i', until the display reads \'Press V to Relearn Remote Key\'.
Step 3: Press the Set/Reset button until \'Remote Key Learning Active\' appears.
Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed.
Step 5: Program additional remotes by repeating Step 4 for each fob.
Step 6: Exit programming mode by turning off the vehicle and removing the key.
Step 7: Test your remote(s).
If Your 2007-2010 Silverado Doesn\'t Have a VIC - Vehicle Information System
Step 1: Sit in the vehicle with all the doors closed and unlocked. Turn the key to Accessory Power position.
Step 2: Press the trip odometer meter reset stem repeatedly until you see \'Relearn Remote Key\'.
Step 3: Press and hold the trip odometer meter stem for three seconds. The display will read \'Key Learning Active\'.
Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed.
Step 5: Program additional remotes by repeating Step 4 for each fob.
Step 6: Exit programming mode by turning off the vehicle and removing the key.
Step 7: Test your remote(s).
If You Have a 2011-2014 Silverado
Bring your vehicle into your local dealership to have your remote(s) programmed.
When in doubt, check your owner\'s manual. Information on how to program your remote is located in the Driver\'s Information Center section.
...'>Program Key Fob 2004 Chevy Impala(04.05.2020)